| Base Material: HT250 |
| Base Hardness: HB210 |
| Friction Coef (µ):
< 0.17 |
| Temp Limit: 400¡æ |
| Dynanic Load Limit: 60N/m©O |
| Load Limit Under 1m/min: 15N/m©O |
| Sliding Velocity Limit:
0.5m/s |
| PV Limit: 0.8N/m©O.m/s |
| Description: JDB-4
is based on cast iron HT250 and embedded with solid lubricant.
It is a typical cost saving product. It is a typical cost
saving product. It can be applied as a substitute of JDB-2
in where mechanical demands are not very high, for instance,
guide post of mould, mold-frame of plastic injection machine
etc. |
You
are here: 
